How To Change Dahua Camera Ip Address

Contents

• i How to Alter IP Address of IP Camera / Change IP Camera that is stuck on "192.168.1.108"
  • 1.i Description
  • 1.two Prerequisites
  • 1.3 Video Instructions
  • 1.4 Step past Step Instructions
    • ane.iv.one How To Initialize Camera
      • 1.4.1.one Preparing the Computer
    • 1.4.2 How To Modify IP Address

How to Modify IP Address of IP Camera / Alter IP Camera that is stuck on "192.168.one.108"

Description

This guide will bear witness how to initialize a Dahua IP Camera and modify the IP Accost

Prerequisites

• Windows Reckoner to use Config tool
• Wired or wireless connection to the router or switch
• Powered IP camera, connected to the network

Video Instructions

Step by Step Instructions

How To Initialize Camera

Preparing the Computer

The reckoner should be assigned an IP that is set to the same subnet as the default IP the device will be at. Well-nigh Dahua devices will default to the IP address 192.168.1.108

• 

  Right click the network icon in the taskbar on the computer. Select "Open up Network and Sharing Heart"

• 

  Click "Modify adapter settings" on the left side of the screen

• 

  Select the network adapter that is connected to the device

• 

  Correct click, select Properties

• 

  Select 'Net Protocol Version 4 (TCP/IPv4) in the list and then click "Backdrop" button

• 

  Select "Apply the following IP address" then enter a static IP for the figurer that volition lucifer the defaulted device:192.168.1.x

ane. Launch ConfigTool

2. Uninitialized devices will appear in the listing at their default IP 192.168.1.108

3. To initialize the camera:

• Bank check the box next to the device in the listing
• Click Initialize

4. The Device initialization window will appear

Devices on the network that have non been initialized volition appear in this window

Bank check the box next to the device then click Initialize

5. Continue with device initialization:

• Create a countersign for the device by entering it twice in the Password fields
• Enter an email address, which is used for countersign reset

Click Next

6. Select the options for 'Easy4ip' and 'Auto-check for updates' as desired then click OK

vii. Device initialization will brainstorm to process

8. A bulletin will confirm a successful initialization.

Click Finish

How To Change IP Address

1. From the 'Modify IP' section of ConfigTool

Click 'Search setting' at the acme of the page

ii. Enter the username/countersign for the device (created in the previous guide)

And so click OK

3. The device will appear in the listing.

To change the IP address for the device:

• Bank check the box next to the device
• Click Modify IP

4. The Modify IP Address window will appear

Modify the IP every bit desired, inbound all information

• Mode: Static or DHCP
• Start IP: IP of device
• Subnet Mask: Subnet mask for network
• Gateway: Gateway for network

And so click OK

five. A green cheque mark next to the device in the list volition confirm a successful IP change

6. Click the Refresh button

7. The device will announced in the list with the updated IP information

Source: https://dahuawiki.com/Camera_Troubleshoot/Change_IP_Cameras_IP_Address

Posted by: brucesiderear.blogspot.com

Share this post